FL6410 - The Android Development Kit. 800MHz Samsung S3C6410 microprocessor, 256MB DDR RAM, 1GB NAND Flash. Ready-to-Go Board Support Pakcage for Android supporting USB ADB, CMOS camera, WIFI, GPS, GPRS, 3G - The most complete Android-Supported S3C6410 development kit!

• Samsung S3C6410 microcontroller based on the ARM1176JZF-S core, frequency @ 667MHz;
• 256MB Mobile DDRram;
• 1GB NAND Flash;
• iNAND Flash support;
• One reset button implemented with specific reset chip;
• Four serial ports, including 2 RS232 and 2 TTL;
• One 100M Ethernet port with DM9000AE and indicators, RJ45 interface
• One USB Host interface supporting USB1.1 protocol;
• One USB Slave (MINI-USB) interface supporting USB2.0 protocol;
• One high-speed SD card slot supporting SD Memory and SDIO;
• One Microphone socket;
• One Earphone socket;
• One on-board MIC;
• One 1.5W speaker interface;
• LCD and touch screen interface supporting 4.3”, 7” TFT LCD;
• One VGA connector
• One AV-IN input interface;
• One TV-Out interface (PAL/NTSC);
• One CMOS camera connector;
• One CAN Bus interface;
• One RS485 interface
• One on-board GPS connector;
• One on-board GPRS connector;
• One on-board 3G Module connector;
• One on-board WIFI interface;
• Built-in RTC (Real Time Clock) with back-up battery;
• One JTAG interface using 2*10pin connector;
• Ten Android-Oriented User Buttons;
• Two user LEDs;
• One GPIO interface including SPI, IIC, 4 x ADC, 3 x interrupt, 2x TTL UART
• Dimension: 180 x 140mm
• Working Temperature: 0 to 70℃

All softwares are provided for free!

1. 1 × FL6410 development board
2. 1 × 7” TFT LCD with touch panel and stylus.
3. 1 × serial port cable
4. 1 × USB cable
5. 1 × Ethernet cable
6. 1 × 5V power supply
7. 1 × DVD
    

Optional Components: (The following add-ons have been tested on the OK6410 and are plug and play)

• J-LINK Emulator. Recommended for software debugging.
• 4.3” TFT LCD with touch panel and stylus
• OV9650 1.3MPixelCMOS camera
• OV3640 3MPixel CMOS camera
• WIFI module
• GPRS module
• GPS module
• 3G Module