FLMX6Q with 7" Capacitive Touch Screen

ARM Cortex A9 platform featuring Freescale i.MX6 quad-core 1GHz microcontroller, 1GB DDR3 RAM, 8GB eMMC Flash, Vivante GC355/GC320 GPU, on-board 5MP digital camera.  7inch capacitive touch screen included.

OK335xS with 7" Capacitive touchscreen LCD

Low-cost & Multi-functional industrial-level development platform specially designed for industrial applications. 1GHz TI AM335X Cortex-A8 processor, 512MB DDR3 RAM, CAN Bus, RS485, PROFIBUS, Dual Gigabit Ethernet, on-board PMU & GPU. 7inch capacitive touch screen included.

OK210 with 7" Capacitive touchscreen LCD

Product-level ARM Cortex-A8 development kit based on Samsung S5PV210 1GHz microcontroller, 512MB DDR RAM, 1GB NAND Flash, USB 2.0 OTG, PowerVR SGX540 graphic engine, 1080p@30fps hard decode. 7inch capacitive touch screen included.

OK6410 with 4.3" LCD

S3C6410 ARM11 development board bundled with a 4.3" TFT LCD. The most popular ARM11 development kit of 2012! 256MB DDR RAM, 1GB NAND Flash, WinCE / Linux / Android support, advanced Video / graphic support with 3D acceleration.

 
OK6410-BH with 4.3" LCD

OK6410-BH ARM11 development board bundled with a 4.3" TFT LCD. Samsung S3C6410 MCU, 256MB DDR RAM, 1GB NAND Flash, WinCE / Linux / Android / uCos-II support, advanced Video / graphic support with 3D acceleration.

J-LINK OEM (Recommended)

Full-featured OEM version of the J-LINK emulator, working with IAR EWARM, ADS, KEIL, WINARM, Real View and other integrated development environment for emulating ARM7/ARM9/ARM11/Cortex cores. Easy to connect, Easy to use, Easy to learn, the J-LINK has been well known as the best and most useful development tools for ARM-based Embedded Systems. As JTAG wiggler is not available yet for the S3C6410 series, J-LINK OEM is highly recommended for our OK6410 and TE6410 ARM11 development kits.

FL6410 with 4.3" LCD

FL6410 - The Android Development Kit. 800MHz Samsung S3C6410 microprocessor, 256MB DDR RAM, 1GB NAND Flash. Ready-to-Go Board Support Pakcage for Android supporting USB ADB, CMOS camera, WIFI, GPS, GPRS, 3G - The most complete Android-Supported S3C6410 development kit!

 
FL6410 with 7" LCD

FL6410 - The Android Development Kit. 800MHz Samsung S3C6410 microprocessor, 256MB DDR RAM, 1GB NAND Flash. Ready-to-Go Board Support Pakcage for Android supporting USB ADB, CMOS camera, WIFI, GPS, GPRS, 3G - The most complete Android-Supported S3C6410 development kit!

 
 
OK6410

OK6410 is an ARM11 rapid development kit includes one OK6410-CORE SOM module, which carries the S3C6410 micro controller, 256MB DDRram, 1GB NAND Flash, and one OK6410 carrier board. Together with the OK6410 we provide BSP for Linux, WinCE, Android, uCos/II.

 
OK6410-BH

The single-board version of OK6410. Samsung S3C6410 633MHz micro-processor, 256MB RAM, 1GB NAND Flash. WinCE, Linux, Android, uCos/II available. Advanced Video / graphic support with 3D acceleration.

FL2440 with 4.3" LCD

Rapid Development Kit on promotion for the S3C2440 micro processor. 64MB SDRAM, 256MB NAND Flash, 3 serial ports, 4 USB, 100M Ethernet, SD card slot. Core board + carrier board structure. 4.3" LCD included.

FL2440 with 5.6" LCD

ARM9 development kit including an FL2440 ARM9 S3C2440 development board and a 5.6" LCD with touch screen. Samsung S3C2440 micro processor, 64MB SDRAM, 256MB NAND Flash, 4 USB host, 3UART, 100M ethernet.

FL2440

ARM9 development kit including an FL2440 ARM9 S3C2440 development board and a 5.6" LCD with touch screen. Samsung S3C2440 micro processor, 64MB SDRAM, 256MB NAND Flash, 4 USB host, 3UART, 100M ethernet.

OK6410-CORE

Second version of Witech S3C6410 microcontoller-based ARM11 System on Moule, 533MHz MCU, 256MB SDRAM, 1GB NAND Flash. Tested through wide temperature range and electromagnetism environment, the OK6410-CORE is totally up to the product-level standard and applicable for high-end consumer electonics, industrial control equipment, Vehicle navigation device, HMI, multi-media terminal, POS terminal, PDA, etc.

 
FL2440-CORE

Samsung S3C2440 micro contoller based system on module. 6-layer 70*50mm PCB, 2 x 4Banks x 4Mbits x 16bits (64MB) SDRAM, 256M Nandflash, dual operating system (Both WinCE and Linux can be loaded at the same time)

5.6" LCD

5.6 inch TFT LCD with touch panel attached, 640*480 pexils. 100% fit to FL2440, OK2440-III, OK6410

 

 

 

manufacturer

INNOLUX

model

AT056TN52

backlight

LED

resolution

640 X 480

color

256K

proportion

4:3

active area(mm)

112.896(W) X 84.672(H) mm

dot pitch(μm):

0.0588(W)X0.1764(H)mm

viewing angle(U/D/L/R)

(CR>10)65/50/60/60

luminance (cd/m2):

200

contract ratio

500:1

response time

20ms

Pin

40

backligh power consumption

2W

operation temp.

-20℃ ~ +70℃

Dimensions

  • Over All: 144 mm *105 mm
  • Mounting Holes: 136 * 97 mm
WIFI Module

We have both USB WIFI and SDIO WIFI. You buy this and we will ship USB WIFI for the S3C2440 development boards and SDIO WIFI for S3C6410 development kits.

 

Module Number:WM-G-MR-09 (Marvell8686)
Interface: SDIO(1bit/4bit) / USB
Standard: IEEE 802.11b/g
data rate: 54Mbps
Power Consumption: 0.6mA@sleep, 170mA@Receive, 265mA@Transmit
Response Rate: -70 dbm @ 54Mbps, -85 dbm @ 11Mbps, -90 dbm @ 1Mpbs
Works in: WinCE6.0
security: WEP 64/128 bit, AES, TKIP, WPA, WPA2, CCX V1,V2

OV9650 1.3MP CMOS camera

CMOS camera module for TE2440-II, TE6410, OK2440-III, FL2440, TE6410, OK6410, TE9263, 1.3MPexils